January 24, 2006
For Immediate Release
Contact: Tom Puerling |
HELICAL PRODUCTS
COMPANY, INC.
901 West McCoy Lane
P.O. Box 1069
Santa Maria, CA 93456
Tel: 805-928-3851
FAX: 805-928-2369 |
“MACHINED” SPRINGS INCORPORATE SEVERAL FUNCTIONS
SANTA MARIA, CA., January 24, 2006---These compression/extension “machined” springs from Helical Products Company, Inc. incorporate multiple features into a single component.
The opportunity to incorporate attachments that best benefit the application is one of the major benefits of a machined spring, i.e., the ends of a compression spring can be flat and square. Also, the slot is of constant width from end to end, thus there is no progressive touching of adjacent coils that would produce sound, debris or non-linearity.
Materials generally used in machined springs manufacture include maraging materials such as 17-4PH CRES, 15-5PH CRES, Carpenter Custom 455 and Vascomax C300. Springs from 7075-T6 aluminum and Delrin are also common.
For more
information contact Helical Products Company, Inc., P.O. Box 1069, Santa
Maria, CA 93456. Tel (877)353-9873, Fax (805)928-2369, Web site:
http//www.Heli-Cal.com.
# # #
|
We
manufacture single piece 
