|
February 24, 2003
FOR
IMMEDIATE RELEASE
Contact:
Tom Puerling |
Helical Products Company, Inc.
P.O. Box 1069
901 W. McCoy Lane
Santa Maria, CA 93456 U.S.A.
Phone: 805-928-3851
FAX: 805-928-2369
|
COST-EFFECTIVE X-SLOT COUPLINGS FEATURE HIGH
TORSIONAL STIFFNESS, LOW RADIAL LOADS
SANTA MARIA, CA., February 24, 2003--Helical Product Company’s X-Slot
couplings bridge the gap
and offer a cost-effective balance between
couplings that are too stiff radially and those not stiff
enough torsionally
for servo type applications.
The X-Series coupling incorporates two flexible element sets—combining
greater end-to-end rotational accuracy with radial accuracy—in one design.
In durability testing the couplings have been subjected to parallel offsets
of up to five times its rated value and tested to failure. The coupling
tests for tens of millions of cycles at these exaggerated offsets and
exhibits an exceptional performance capability.
X-Series couplings are available in six outside diameter sizes, from 15mm to
50mm and any bore combination between the listed minimum and maximum.
Coupling is available in aluminum or stainless steel and can be ordered with
bores that are either millimeter, inch, or combination of the two.
For more information contact Helical Products Co., Inc. P.O. Box 1069, Santa
Maria, CA 93456. Tel (805)928-3851, Fax (805)928-2369, Web site: http//www.Heli-Cal.com.
For more information or a free
catalog, please
contact us or
fill out our
online request form.
|
