| November 27, 2001 FOR IMMEDIATE RELEASE
Contact: Tom Puerling |
Helical Products Company, Inc.
P.O. Box 1069
901 W. McCoy Lane
Santa Maria, CA 93456 U.S.A.
Phone: 805-928-3851
FAX: 805-928-2369
|
“MACHINED” SPRING INCORPORATES SEVERAL FUNCTIONS
SANTA
MARIA, CA., November 27, 2001. This compression/extension
“machined” spring from Helical Products Company, Inc. incorporates
multiple features into a single component.
The opportunity to incorporate attachments that best benefit the
application is one of the major benefits of a machined spring, i.e., the
ends of a compression spring can be flat and square. Also, the slot is
of constant width from end to end, thus there is no progressive touching
of adjacent coils that would produce sound, debris or non-linearity.
Materials generally used in machined springs manufacture include
maraging materials such as 17-4PH CRES, 15-5PH CRES, Carpenter Custom
455 and Vascomax C300. Springs from 7075-T6 aluminum and Delrin are also
common.
For more information
contact Helical Products Company, Inc., P.O. Box 1069, Santa Maria, CA
93456. Tel (805)928-3851, Fax (805)928-2369, Web site: www.Heli-Cal.com.
For more information or a free catalog, please
contact us or fill out our
online request form.
|
